The ESP power cable transmits the required surface power to the ESP motors. Typically, it is banded or clamped to the production tubing from below the wellhead to the ESP unit because it is not designed to support its own weight. It is a specially constructed three-phase power cable designed specifically for downhole well environments.
Description
EPDM insulation, Inner lead sheath, Fluoropolymer tape applied with an
overlap over the lead sheath, Synthetic braid covering completely over the
lead sheath, Full galvanized steel (or stainless steel or Monel) tape armour.
Performing Criterion
IEEE1017 . IEEE 1018 . IEEE1019 . API RP 11S5 . API RP 11S6
Application Range
This cable is applicable for use in Electric Submersible Pump Units with rated
voltage 4kV or 5kV. The permissible working temperature range is -40 °C to
232 °C, The cable has the excellent ability of oil-resistance, heat-resistance
and corrosion-resistance.
Quality Guaranteed：One year after delivery.
Packing：
Steel reels of corrugated corellon, outside wrapped by fuming wood; Packing length according to customer’s requirement.
