5, the solar panel angle adjustment has the problem, causes the solar energy Board to charge the efficiency to be low.
Solar panels The correct angle adjustment should follow the simple principle: let sunlight direct solar panels, so that the charging efficiency is the largest.
In different places, the tilt angle of the solar panel can refer to the local latitude, the latitude is how much, the solar panel on the horizontal tilt angle, so for different latitude and different road, solar panel angle adjustable is quite critical.
6, solar panels placed in the room to recharge;
Put the solar energy lights in the parking space to facilitate the night parking, but at the same time also put solar panels in the shed, so that the charging effect of natural greatly discounted, this situation we can use outdoor charging, indoor discharge, solar panels and lamps separated by the way to install.
7, at will extend the solar panel connection line randomly;
Some locations due to the installation of solar panels too much interference, the solar panels and lights will be separated by a long distance, and some are separated by more than 10 meters or even longer distances, and then casually in the market to buy two-core wire connected to this matter. Because the market is generally the quality of wire is not very good itself, coupled with the line of distance drawn very long, line loss is very large, so the charging efficiency will be much lower, resulting in light time affected.
8, the field personnel will not use the project controller correctly, the parameter setting error led to no light.
According to many on-site understanding, some construction staff feedback, do not know the function of the remote control, in short, disorderly press a pass, the light is no matter. In fact, this time it is possible to set the parameters of the error, causing the lights to abnormal.