Aluminium Rod Continuous Casting and Rolling Line(CCR line) used for producing Aluminium rod through melting, casting and continuous rolling process from the raw material of cathod of copper scrap. The series equipment used for producing Al & Al alloy rod through melting, casting and continuous rolling process from the raw material of cathod of Al ingot.
The line can equip different kinds of Aluminium furnace according to various raw materials;
After the ingots melting or electrolytic aluminum temperature increasing, the molten will be pouring to the 6 wheel type casting machine through the launders. Through horizontal pouring, aluminum will be crystallized to trapezoid ingots, the oil pressure cutter will cut the waste ingots, and feed the ingots into he rolling mill, after non- butter take-up and swing rod, the rod will down to the 2 baskets and coil.
Aluminum melting furnace, holding furnace, 6–wheel casting machine, cutter, rolling mill, non-butter leading pipe, coiler and take-up machine, gearbox lubrication system, emulsion oil cooling system, water cooling system and electrical control devices.
Al ingot ---Melting furnace ---Holding furnace-- 4 or 6 Horizontal casting machine ---Shearer -- rolling mill --- water cooling --- take up.
Casting bar section(mm2)
Outlet rod dia.(mm)
Finished rolling speed(m/s)
Aluminium Rod Continuous Casting and Rolling Line
Alloy Rod Continuous Casting and Rolling Line